Aldor Automotive FOR2TRSU Manuale di montaggio

Sfoglia online o scarica il pdf Manuale di montaggio per Automobile Accessories Aldor Automotive FOR2TRSU. Aldor Automotive FOR2TRSU 4.

ATTENTION!

To obtain an optimal fixation the room temperature at mounting should be at least 15°C!

Mounting

Check the fit of the spoiler on the car.

Use sandpaper to roughen the mounting surface of the spoiler, so that the basic material becomes visible.

Thoroughly clean the mounting surfaces of both spoiler and tailgate with alcohol.

Apply the enclosed spoiler glue to the mounting surface of the spoiler (fig. 1).

Place the spoiler on the tailgate and put it in the correct position.

Slightly open the tailgate and temporarily fix the spoiler with tape. Pull the tape from the spoiler around the

edges of the tailgate (fig. 2), so that eventual gaps will be minimised. Any squeezed-out rests of glue must be

removed immediately with alcohol!

ATTENTION!



Allow the glue to dry for 12 hrs. Do not use the car during this period. During 24 hrs no mechanical loading

should be applied to the part. Do not wash for 48 hrs.



No warranty acceptance of any damage due to the use of a car wash.

fig. 1

fig. 2

ASSEMBLY MANUAL

Ford Transit & Tourneo Connect II 2013- roof spoiler

For models with single tailgate

glue / Kleber / lijm / colle

Art.nr.

: FOR2TRSU

Material

: PU

Parts list

Part

Roofspoiler

Tube spoiler glue

Required tools:

- Sandpaper

- Alcohol

- Tape

Van Hilststraat 4

5145 RL Waalwijk

The Netherlands

tel: +31-416-344 778

fax: +31-416-344 984

www.aldorautomotive.com

Qty

HYU11I1BP.docx / Rev. 0