Directed DIRECTECHS CHRYSLER10 Manuale di installazione - Pagina 18
Sfoglia online o scarica il pdf Manuale di installazione per Allarme auto Directed DIRECTECHS CHRYSLER10. Directed DIRECTECHS CHRYSLER10 19.
Stampa la pagina
Quick Reference Guide
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
•
Factory remote.
•
Aftermarket remote.
•
Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover with Push-to-Start (PTS)
Close the vehicle doors, hood and trunk, then send
1
the Remote Start command to start the vehicle.*
Send the Unlock command on the factory or
2
aftermarket remote.*
Complete the following steps within 45 seconds or the vehicle will shut down.
Enter the vehicle, while making sure the factory
3
remote is inside with you.
4
Press the PTS button twice.
Depress the brake pedal, put the car in gear and
5
drive off.
* Icon and remote appearance may differ depending on the model purchased.
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the
1
gear in Park (P).
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
It is safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the
doors of your vehicle when leaving it unattended.
Press Remote
Start button*
* Icon and remote appearance may differ depending on the model purchased.
List of available commands
Press Unlock on
either remote*
Note that the information below is for many Viper, Clifford, Python, Avital and
Automate models. Icons and commands may differ depending on the model and
options purchased. Refer to your authorized installation center for more specific
information.
14:36
Enter vehicle
Button(s)
with remote
Ready to
drive off
* Icon and remote appearance may differ depending on the model purchased.
14:36
14:36
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
*
* Press & hold for 5 seconds to activate the trunk release (optional).
Put
gear in
Park
&
Parking lights flash x1
Press Remote
Start button*
14:36
Exit vehicle
with remote
Directed Digital Solutions CHRYSLER10
© 2020-03-09 Directed. All rights reserved.