Clarke Metalworker CL251MH Istruzioni per il funzionamento e la manutenzione - Pagina 5
Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke Metalworker CL251MH. Clarke Metalworker CL251MH 16. Metalworker milling/drilling attachment
Stampa la pagina
19. DO NOT STAND ON THE MACHINE. Serious injury could occur if the machine is
tipped over. Do not store materials above or near the machine such that it is
necessary to stand on the machine to get to them.
20. NEVER operate a machine when under the influence of alcohol, drugs or
medication.
21. ALWAYS ENSURE THAT ADEQUATE LIGHTING is available. A minimum intensity
of 300 lux should be provided. Ensure that lighting is placed so that you will
not be working in your own shadow.
ADDITIONAL SAFETY RULES FOR DRILL/MILL HEADS
THIS MACHINE MUST NOT BE MODIFIED, OR USED FOR ANY PURPOSE OTHER THAN
1. IMPORTANT: You should not operate this machine unless you are thoroughly
familiar with drilling machines and drilling techniques. If there is any doubt
whatsoever, you should consult a qualified person.
2. Do not operate the machine until it is completely assembled, and you have
read, and understood this entire manual
3. Before switching the machine ON, ALWAYS:-
a. Ensure all chuck keys, spanners and wrenches are removed from the
machine.
b. Examine the setup carefully, ensuring that the workpiece is perfectly secure.
c. Ensure your clothing is properly adjusted.
d. Make all adjustments with the power OFF.
5. Always use the correct milling/drilling speeds for the mill/drill size, and the type
of material being worked (see page 11).
7. NEVER leave the machine unattended whilst it is running. Turn it OFF and do not
leave until it has come to a complete stop.
8. When you have finished with the machine, always remove and store the mill/drill
bits.
9. ALWAYS use clamps, or a vise bolted to the Cross-Slide, to hold the work. It must
NEVER be held in bare hands.
WARNING!
THAT FOR WHICH IT IS DESIGNED.
5