Zanussi ZA 25 S Libretto di istruzioni - Pagina 19

Sfoglia online o scarica il pdf Libretto di istruzioni per Frigorifero Zanussi ZA 25 S. Zanussi ZA 25 S 20. Fridge-freezer za 25 s
Anche per Zanussi ZA 25 S: Libretto di istruzioni (23 pagine)

Stampa la pagina

Door reversibility

1. Unplug the appliance from the power supply

before carrying out the below-mentioned

operations.

2. Remove the ventilation grill (D).

3. Unscrew the bottom hinge (E).

4. Remove the fridge door by releasing it from the

middle hinge (H).

5. Unscrew the middle hinge.

6. Remove the freezer door by releasing it from the

top hinge pin (A).

7. Remove the pin (A) then mount this on the

opposite side, after having removed the plugs

which must be refitted on the other side.

8. Refit the freezer door.

9. Replace the middle hinge to the left hand side.

10.Replace the fridge door.

11. Screw down the bottom hinge (E) on the opposite

side by using the screws previously removed.

12.Remove the plug (F) from the ventilation grill (D)

and replace it on the opposite side.

13.Re-assemble the ventilation grill (D).

14.On the side where the handle is to be fitted, push

in the blanking cover caps to free the new holes.

Remove the handles and refit them on the

opposite side. Cover the holes left open with the

plugs contained in the documentation pack.

The doors can be aligned by adjusting the middle

hinge.

The middle hinge can be adjusted horizontally, with

the help of a tool, after having slackened the two

screws.

Important

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a low setting.

D736

D737