Clarke Woodworker CJS2 Istruzioni per il funzionamento e la manutenzione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke Woodworker CJS2. Clarke Woodworker CJS2 6. Variable speed jigsaw
Stampa la pagina
Thank you for purchasing this CLARKE Jig Saw, which is designed for DIY and light workshop
use only.
Before attempting to use the machine, please read this manual thoroughly and follow
the instructions carefully. In doing so you will ensure the safety of yourself and that of
others around you, and you can look forward to the saw giving you long and satisfactory
service.
Guarantee
This product is guaranteed against faulty manufacture for a period of 12 months from the
date of purchase. Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in
any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned
to us without prior permission.
This guarantee does not effect your statutory rights.
Specifications
Elec. Supply .............................................................. 230V 50Hz 1 ph
Power Rating ........................................................... 420W Motor
Fuse Rating ............................................................... 5amp
No Load Speed ....................................................... 0-2,700 strokes/minute
Maximum Cutting Depth ....................................... 55mm
Net Weight ............................................................... 1.5kg
Vibration Emissions..................................................Refer to notes on page 10
This Product Conforms To 98/37/EEC Regulations
When disposing of this product, ensure it is disposed of according to all local ordinances. It must
not be disposed of with general household waste.
Please note that the details and specifications contained herein, are correct at the time of going to print. However,
CLARKE International reserve the right to change specifications at any time without prior notice.
-1-
You will note that a third value is given in the specification - the highest measured
reading in a single plane. This is the maximum level of vibration measured during
testing in one of the axes, and this should also be taken into account when making a risk
assessment.
2
'a' values in excess of 2.5 m/s
are considered hazardous when used for prolonged
periods. A tool with a vibration value of 2.8 m/s
(cumulative) per day, whereas a tool with a value of 11.2 m/s
per day only.
The graph below shows the vibration value against the maximum time the respective
tool may be used, per day.
The uncertainty factor should also be taken into account when assessing a risk. The two
figures 'a' and 'K'may be added together and the resultant value used to assess the risk.
It should be noted that if a tool is used under abnormal, or unusual conditions, then the
vibration level could possibly increase significantly. Users must always take this into
account and make their own risk assessment, using the graph above as a reference.
Some tools with a high vibration value, such as impact wrenches, are generally used for
a few seconds at a time, therefore the cumulative time may only be in the order of a few
minutes per day. Nevertheless, the cumulative effect, particularly when added to that
of other hand held power tools that may be used, must always be taken into account
when the total daily dose rate is determined.
2
may be used for up to 8 hours
2
may be used for ½ hour
-10-