Zanussi ZRB34NA Libro di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Libro di istruzioni per Frigorifero Zanussi ZRB34NA. Zanussi ZRB34NA 17. Refrigerator-freezer combination

Stampa la pagina

Technical data

Model

Gross capacity (l)

Net capacity (l)

Width (mm)

Height (mm)

Depth (mm)

Energy consumption (kWh/24h)

(kWh/year)

Energy class, according to EU standards

Freezing capacity (kg/24h)

Rising time (h)

Rated current (A)

Weight (kg)

Number of compressors

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in orig-

inal packaging, in vertical position considering the

protective warning on packaging.

After each transportation the appliance must not be

switched on for approx. 2 hours.

Unpack the appliance and check if there are damages on

it. Report possible damages immediately to the place you

bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape and everything else, which

ensure the accessories not to move in the appliance.

Wash the inside of the appliance using lukewarm water

and mild detergent. Use soft cloth.

After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the energy

consumption and proper operation of the appliance.

When placing, take into consideration that it is practical

to operate the appliance between ambient temperature

limits according to the climate class that is given in the

chart below and can be found in the data label.

Class of climate

Ins

uctions f

Ins

uctions f

ZRB34NA

Freezer:

Refrigerator: 110

Freezer:

Refrigerator: 92

1750

Ambient temperature

+10 ... +32 °C

+16 ... +32 °C

+18 ... +38 °C

or the Ins

226

223

595

632

0,93

339

0,9

If the ambient temperature goes below the lower data the

temperature of the cooling compartment can go beyond

the prescribed temperature.

If the ambient temperature goes beyond the upper data

this means longer operating time of the compressor,

breakdown in the automatic defrosting increasing temper-

ature in the cooling compartment or increasing energy

consumption.

Mount the spacers supplied in the plastic bag of the

accessories. Hold the spacer as shown on the Fig.,

knock it home, then turn it by 90°. (Into the oval holes

of back side of the appliance.)

When placing the appliance ensure that it stands level.

This can be achieved by two adjustable feet at the bottom

in front.

aller