Zanussi ZRX51100WA Manuale d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'uso per Frigorifero Zanussi ZRX51100WA. Zanussi ZRX51100WA 44.
Anche per Zanussi ZRX51100WA: Manuale d'uso (42 pagine)

Stampa la pagina

Ideally, however, the appliance should not be

positioned below overhanging wall units

Accurate levelling is ensured by one or more

adjustable feet at the base of the cabinet

It is advisable for there to be 75mm separating

the back of the fridge to the wall, at least 100mm

of space at its two sides, height of over 100mm

from its top and a clear space upfront to allow

the doors to open 160°

Door reversibility

WARNING!

Before carrying out any operations, re-

move the plug from the power socket

CAUTION!

To carry out the following operations, we

suggest that this be made with another

person that will keep a firm hold on the

doors of the appliance during the

operations

1. Remove the top hinge cover

2. Unscrew the 2 retaining screws, and remove

the hinge from the appliance

3. Take the door off

4. Unscrew the two screws fixing the lower

door hinge (there is a foot fixing on the

hinge, do not remove it from the hinge) Take

the door off

5. Then remove the left foot as shown in the

figure.

6. Fix the door hinge (with the original foot

on it) on the opposite side and then the

loosened foot at the former place as

shown in the figure.

Make sure to place the screws in the right

holes as shown in the figure.The edge of

the hinge is parallel with the side of the

cabinet

Please make sure to place the lower foot

below the door hinge. The lower foot is

recognizable by its 4 ribs on the outer

surface.

7. Fix the door onto the lower hinge pin

8. To fit top door hinge, remove the plastic

screw hole cover carefully, and refit them

in the holes left by the hinge retaining

screws

9. Refit the top hinge using the 2 retaining

screws, making sure that the edge of

the door is parallel with the side of the

cabinet

10. Replace the hinge cover

11. Relocate the handle and the plastic plugs

to the opposite side

WARNING!

Reposition, level the appliance, wait for

at least four hours and then connect it to

the power socket