Zanussi ZT 45 Libretto di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Libretto di istruzioni per Frigorifero Zanussi ZT 45. Zanussi ZT 45 17.

Stampa la pagina

Maintenance and Cleaning

Before any maintenance or clearing work is carried

out, DISCONNECT the appliance from the

ELECTRICITY supply.

Internal clearing

Clean the inside and accessories with warm water

and bicarbonate of soda (5ml to 0.5 litre of water).

Rinse and dry thoroughly.

NEVER USE DETERGENTS, ABRASIVE POW-

DERS, HIGHLY PERFUMED CLEANING PROD-

UCTS OR WAX POLISHES, TO CLEAN THE INTERI-

OR AS THESE WILL DAMAGE THE SURFACE AND

LEAVE A STRONG SMELL.

The freezer drawers can be easily removed for more

thorough cleaning. Pull out fully and lift, unhooking

them from the catches.

For repositioning lift the drawers, insert under the

catches and slide in.

Clean the drain hole of the water trough at regular

intervals and make sure that the drain hole is never

obstructed, so that the defrost water may flow freely.

External clearing

Wash the outer cabinet with warm soapy water. Do

NOT use abrasive products.

Once or twice a year dust the condenser (black grill)

and the compressors at the back of the appliance,

with a brush or vacuum cleaner, see figure

You MUST ensure that the appliance is switched OFF.

An accumulation of dust will affect the performance of

the appliance and cause excessive electricity con-

sumption.

When the appliance is not in use

When the appliance is not in use for long periods, dis-

connect from the electricity supply, empty all foods

and clean the appliance, leaving the doors ajar to pre-

vent unpleasant smells.

Changing the light bulb

Should the interior light fail to work, first switch off the

appliance and disconnect from the electricity supply,

then replace the bulb as follows, see figure

1. Unscrew the light cover and then pull it outward

toward the middle of the cabinet.

2. Unscrew the bulb and replace it with a new 15

watt bulb (available from your nearest Zanussi

Service Force Centre).

3. Replace the light cover by sliding it into its original

position and replacing the screw.