Zanussi ZT 52/2 R Libretto di istruzioni - Pagina 14

Sfoglia online o scarica il pdf Libretto di istruzioni per Frigorifero Zanussi ZT 52/2 R. Zanussi ZT 52/2 R 16.

Door Reversal

Before carrying out the operations described below,

pull out the mains plug from the wall socket.

To carry out this reversal go through the following

steps:

1. Gently lay the appliance on its back with the top

held away from the floor by 5-8 cm (2-3 inches) of

packing.

2. Remove the bottom door hinge (5).

3. Remove the door (4) by opening it and pulling it

gently downwards to remove it from the top hinge

pin (2).

4. Unscrew the top hinge pin (2) from the top hinge

(1) and replace it in the opposite hole on the left

hand side.

5. Unscrew the foot at the base (6) of the appliance

and refit it on the opposite side.

6. Refit the door and the bottom hinge to the left hand

side.

When positioning the bottom hinge blade on the

reverse side, the securing screws will require a

degree of exersion when fitting.

It is therefore advisable to lubricate the screw tips

before starting this operation.

Important

After completion of the door reversal operation,

verify that the door gasket is sealing onto the

cabinet.