Zanussi ZT140 Libretto di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Libretto di istruzioni per Frigorifero Zanussi ZT140. Zanussi ZT140 8.

Maintenance

Unplug the appliance before carrying out any

maintenance operation.

Periodic clearing

Clean the inside with warm water and bicarbonate of

soda. Clean the outside with a silicone wax spray.

Clean the condenser and compressor with a brush

or vacuum cleaner.

This will improve performance and consequently

save on electricity.

If you are not using the appliance for any length of

time, the following precautions should be taken:

unplug the appliance;

take all food out;

defrost and clean the inside and all the accessories;

leave the door ajar so that air can circulate inside in

order to prevent unpleasant smells forming.

If the appliance is not functioning properly, check

that:

the plug is firmly in the wall socket and the mains

power switch is on;

there is an electricity supply (find out by plugging in

another appliance);

the thermostat knob is in the correct position.

Also check the following:

If the appliance is very noisy, check that the sides

are not vibrating against adjacent kitchen units and

that the refrigeration unit pipes are not vibrating.

The opening on the diffuser gives access to the light

bulb.

If the light does not come on when the door is

opened, check that the bulb is screwed in properly;

replace the bulb if the fault persists.

The rating is shown on the light bulb cover.

If your appliance is still not working properly after

making the above checks, contact the nearest

service centre.

To obtain fast service, it is essential that when

you apply for it you specify the model and serial

number of your appliance which can be found on

the guarantee certificate or on the rating plate

located inside the appliance, on the bottom left-

hand side.