Zanussi ZU 7155 Libretto di istruzioni - Pagina 16
Sfoglia online o scarica il pdf Libretto di istruzioni per Frigorifero Zanussi ZU 7155. Zanussi ZU 7155 20. Zanussi instruction refrigerator zu 7155
![Zanussi ZU 7155 Libretto di istruzioni](/uploads/products/server2/7120015/7120015.png)
BUILDING-IN INSTRUCTIONS
Before carrying out any work, remove the plug from
the power socket.
Grid preparation
Remove the grid from the appliance pulling it towards
you with hands.
Right door opening:
Remove the left side (A) of the grid cutting it from the
rear (see figure, a).
Left door opening:
Remove the right side (B) of the grid cutting it from
the rear (see figure, b).
To reposition the grid on the appliance proceed as fol-
lows:
Apply the grid to the base of the appliance by pushing
the clasps (a) until they click.
N.B. The grid is to be assembled after having fixed
the appliance in the niche with the brackets.
Door reversal
The appliance must be unplugged before starting
work. To reverse the opening direction of the door,
proceed as follows:
1. remove the top hinge (1) taking care not to let the
door fall;
2. remove the bottom door hinge (5).
3. take out the plugs (3) from the holes (F) and rein-
sert them in the holes (F
4. refit the upper hinge (1) on the opposite side, on
the bottom (position A);
5. refit the door on the pin of the hinge (1) in position
A;
6. insert the pin of the unscrewed bottom hinge (2) in
the upper hole (G) of the door, therefore fix the
hinge on the top in position B.
Important
After completion of the door reversal operation,
verify that the door gasket is sealing onto the
cabinet.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdryer on a low setting.
) on the opposite side;
1
a
S.I.001
A
b
S.I.002
F
B
3
F
A
S.I.003
16
a
a
B
F
1
1
G
F1
2