Zanussi ZU 9141 Libretto di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Libretto di istruzioni per Frigorifero Zanussi ZU 9141. Zanussi ZU 9141 13.

Stampa la pagina

BUILDING-IN INSTRUCTIONS

Before carrying out any work, remove the plug from

the power socket.

Grid preparation

Remove the grid from the appliance pulling it towards

you with hands.

Right door opening:

Remove the left side (A) of the grid cutting it from the

rear (see figure, a).

Left door opening:

Remove the right side (B) of the grid cutting it from the

rear (see figure, b).

To reposition the grid on the appliance proceed as

follows:

Apply the grid to the base of the appliance by pushing

the clasps (a) until they click.

N.B. The grid is to be assembled after having fixed the

appliance in the niche with the brackets.

Door reversal

The appliance must be unplugged before starting

work. To reverse the opening direction of the door,

proceed as follows:

1. remove the top hinge (1) taking care not to let the

door fall;

2. remove the bottom door hinge (2).

3. take out the plugs (3) from the holes (F) and

reinsert them in the holes (F

4. refit the upper hinge (1) on the opposite side, on the

bottom (position A);

5. refit the door on the pin of the hinge (1) in position

6. insert the pin of the unscrewed bottom hinge (2) in

the upper hole (G) of the door, therefore fix the

hinge on the top in position B.

Important

After completion of the door reversal operation,

verify that the door gasket is sealing onto the

cabinet.

If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting

of the gasket or accelerate this process by

heating up the part involved with a normal

hairdryer on a low setting.

) on the opposite side;

S.I.001

S.I.002

S.I.003