Zanussi ZOF35601WK Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Forno Zanussi ZOF35601WK. Zanussi ZOF35601WK 29. Double
Anche per Zanussi ZOF35601WK: Manuale d'uso (21 pagine)
Stampa la pagina
WARNING: The appliance and its accessible parts become hot
•
during use. Care should be taken to avoid touching heating
elements.
Always use oven gloves to remove or put in accessories or
•
ovenware.
Before carrying out any maintenance, disconnect the appliance
•
from the power supply.
WARNING: Ensure that the appliance is switched off before
•
replacing the lamp to avoid the possibility of electric shock.
Do not use the appliance before installing it in the built-in
•
structure.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to
•
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
•
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf
•
support and then the rear end away from the side walls. Install
the shelf supports in the opposite sequence.
The means for disconnection must be incorporated in the fixed
•
wiring in accordance with the wiring rules.
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
•
Remove all the packaging.
•
Do not install or use a damaged appliance.
•
Follow the installation instructions supplied with
the appliance.
•
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
•
Do not pull the appliance by the handle.
•
Install the appliance in a safe and suitable place
that meets installation requirements.
•
Keep the minimum distance from other
appliances and units.
•
Before mounting the appliance, check if the
oven door opens without restraint.
•
The appliance is equipped with an electric
cooling system. It must be operated with the
electric power supply.
•
The built-in unit must meet the stability
requirements of DIN 68930.
Cabinet minimum
height (Cabinet under
the worktop minimum
height)
Cabinet width
Cabinet depth
(720) mm
600-605 mm
550 mm
3