Zanussi ZZB30401XK Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Forno Zanussi ZZB30401XK. Zanussi ZZB30401XK 21.
Anche per Zanussi ZZB30401XK: Manuale d'uso (16 pagine)

Zanussi ZZB30401XK Manuale d'uso
Disconnect the appliance from the power supply before
carrying out any maintenance.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements.
Always use oven gloves to remove or put in accessories or
ovenware.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.

SAFETY INSTRUCTIONS

INSTALLATION
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
the appliance.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Do not pull the appliance by the handle.
Install the appliance in a safe and suitable place
that meets installation requirements.
Keep the minimum distance from other
appliances and units.
Before mounting the appliance, check if the
oven door opens without restraint.
Cabinet minimum
height (Cabinet under
the worktop minimum
height)
Cabinet width
580 (600) mm
560 mm
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
Width of the front of
the appliance
Width of the back of
the appliance
Depth of the appliance
Built in depth of the
appliance
Depth with open door
Ventilation opening
minimum size. Opening
placed on the bottom
rear side
Mounting screws
550 (550) mm
589 mm
570 mm
594 mm
558 mm
561 mm
540 mm
1007 mm
560x20 mm
4x25 mm
3