Zanussi FCS 825C Libretto di istruzioni e installazione - Pagina 7
Sfoglia online o scarica il pdf Libretto di istruzioni e installazione per Lavatrice Zanussi FCS 825C. Zanussi FCS 825C 40.
Stampa la pagina
6 Button "Start/Pause"
This button has two functions:
Start: Press the button in order to start the required
programme. The corresponding indicator lamp
is lit. The indicator lamp for "Locked" in the pro-
gramme progress display is lit and the door is
locked.
Pause: To interrupt a programme which is running, press
the button. The corresponding indicator lamp
starts to flash. To continue the programme, press
the button again.
7 Programme progress display
When you select a wash programme, the light corres-
ponding to the various phases of the programme goes on.
When the programme has started, the display will allways
show which section of the choosen programme the
machine is performing, or if is finished.
= pre wash/main wash
= rinses
= spin
= end
= locked
: the light comes on when the machine is performing
the washing phase (main wash). If you have choosen
the "Pre wash" option by pressing that button, the light
will be on during the pre wash phase too.
: end of programme.
: the light indicates if the door can be opened:
the light is lit: the door can not be opened
●
the light is out: the door can be opened
●
the light flashes: the door can soon be opened
●
8 Spin speed or function
With this selector you can reduce the final spin speed or
select the
"No spin" option. The speeds are applied
for the "white-" and "coloured" programmes.
The position 800 is equivalent to 800 rpm/min for the
●
synthetic and wool programmes and 700 rpm/min for
the delicate wash programme.
The position 400 is equivalent to 400 rpm/min for all
●
the wash programmes.
"No spin", by selecting this option all the spinning
phases are excluded. To be used for extremely
delicate material. The machine will add 3 extra
rinses to the cotton programmes and 1 extra rinse
to the synthetic programmes.
"Rinse Hold", when selecting this position the
water of the last rinse is not drained to prevent
the laundry from creasing. The lights "End" and
"Locked" on the programme progress display are
lit when the programme is finished and indicating
that the water must be drained before the door
can be opened.
To drain the water:
1. Turn the programme selector to the "Reset"
position.
2. Choose the programme "Drain"
You can reduce the spin speed by turning the
selector.
3. Press in the Start/Pause button.
9 Programme selector
The selector is divided into 5 sections:
Cotton
●
Synthetic
●
Delicate
●
Wool
●
Special programmes
●
Turn the programme selector clockwise or anticlockwise
to select the programme and temperature according to
the care label, or one of the special programmes.
= cold, the water is not heated
= resets, cancels the programme, switches the
machine off.
If you turn the programme selector to an other
programme when the machine is working, the
lights in the programme progress display starts
to flash. The machine will not perform the new
selected programme.
When the programme is finished, the pro-
gramme selector must be turned back to the
reset position.
- 7 -
or "Spin"
.