Zanussi DTI 4725 Libretto di istruzioni - Pagina 18

Sfoglia online o scarica il pdf Libretto di istruzioni per Lavastoviglie Zanussi DTI 4725. Zanussi DTI 4725 27. Dishwasher dti 4725

Stampa la pagina

Something not working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Force Centre, please carry out the
checks listed below.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the
cause of any problems.
If the "End of programme" indicator light on the control panel is off and you see the following signals:
In case of a fault, carry out the suggested corrective action, switch off the dishwasher, switch back on
and start the wash programme. If the fault code reappears, contact your local service Force Centre.
Symptom
The machine will not start
The machine does not fill
with water
The filters are blocked
The dishwasher will not drain
General
The machine is noisy
The door is difficult to close
Fault code
"Rinse and Hold"
programme light
flashing very fast
"Intensive"
programme light
flashing very fast
"Quick"
programme light
flashing very fast
"Normal" or "Economy"
programme light
flashing very fast
43
Solution
The door has not been properly closed.
The plug is not properly inserted in the
power socket.
Check the plug fuse.
There is no current at the socket.
Ensure the water tap is open.
Ensure the mains water supply has not
been cut off.
The inlet hose may be squashed or bent.
Reposition the hose.
The inlet hose may be blocked.
Switch off the water supply, and clean
the filter.
Clean the filters, refer to "Maintenance
and cleaning".
The spray arms are not rotating. Ensure
the crockery is loaded correctly.
The drain hose may be squashed or
bent.
Reposition the hose.
The sink may be blocked. Clear any
blockages.
The drain hose extension is not correct.
Follow the instructions for connecting to
the waste.
There is no vent in the end of the drain
hose.
Switch off the dishwasher.
Switch it back on and start the
programme.
If the alarm reappears, call the local
Service Force Centre.
Dishes are rattling against each other,
refer to "Loading your machine".
The spray arms are knocking against the
dishes. Refer to "Loading your machine".
The dishwasher is not level, or not
properly built-in.
PSN03GB