Zanussi DTI 6726 Libretto di istruzioni - Pagina 17
Sfoglia online o scarica il pdf Libretto di istruzioni per Lavastoviglie Zanussi DTI 6726. Zanussi DTI 6726 24. Dishwasher dti 6726
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Force Centre, please carry out the
checks listed below.
Symptom
The machine will not start
The dishwasher does not fill with water
The filters are blocked
The spray arms are not rotating
The dishwasher will not drain
The machine is noisy
The door is difficult to close
The dishes are not clean (poor wash)
Visible lime deposits or white film on
the dishes
The dishes are not quite dry
Solution
The door has not been properly closed.
The plug is not properly inserted in the power socket.
There is not current at the socket.
Ensure the water tap is open.
Ensure the mains water supply has not been cut off.
The inlet hose may be squashed or bent.
Reposition the hose.
The inlet hose may be blocked.
Switch off the water supply, and clean the filter.
Clean the filters (refer to "Maintenance and cleaning").
Ensure the crockery is loaded correctly.
The drain hose may be squashed or bent.
Reposition the hose.
The sink may be blocked. Clear any blockages.
The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
There is no vent in the end of the drain hose.
Dishes are rattling against each other, (refer to "Loading
your machine").
The spray arms are knocking against the dishes.
The dishwasher is not level, or not properly built-in.
The baskets are too full.
The dishes have not been arranged properly.
The spray arms do not rotate.
The spray arms are clogged.
The filters are clogged.
The filters are not in position.
Not enough detergent has been used or it is unsuitable.
The detergent is old or has gone hard.
The salt container cap is not properly closed.
The washing programme selected is too gentle.
Check that the right level of the water softener is setted.
Check that there is salt and that the salt cap is tight.
The rinse aid has run out or too little is being used.
40
PSN01/1GB