Zanussi ZSF 2440 Libretto di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Libretto di istruzioni per Lavastoviglie Zanussi ZSF 2440. Zanussi ZSF 2440 16. Zanussi 60cm wide dual fuel cooker specification table
Anche per Zanussi ZSF 2440: Specifiche (8 pagine)

Stampa la pagina

Adjusting the water softener

To prevent limescaling on the dishes and to the interior of the

dishwasher, the dishes must be washed with soft water.

This dishwasher is equipped with a water softener, where tap-

water which is harder than 4 °d (german degree) is softened.

Adjust the water softener according to the table below for the

water hardness level for your area.

1) german degree of measurement for the water hardness

2) millimol, internationel unit for water hardness

*) factory setting

In the following settings the dishwasher must be switched off and all programmes completed.

See chapter "Using the appliance" for information on how to complete the programme.

1. Press the On/Off button.

2. Press the combination buttons simultaneously

and hold them pressed in. When the ﬁrst three

programme indicator lamps starts to ﬂash, release

the buttons.

3. Press the water softener button once. The lamp

for the water softener starts to ﬂash. The display

shows the hardness setting.

4. The water hardness level is raised by 1 step

every time you press the water softener button.

After hardness level 5 comes hardness level 1.

5. Press the On/Off button when the required water

hardness level is selected. This saves the selection.

If the setting 1 is chosen, the salt indicator lamp

is not lit.

Water hardness level

°d

> 24

18 - 24

12 - 18

4 - 12

below 4

Contact your local Water Authority to ﬁnd the

exact water hardness level for your area.

The water softener has 5 settings:

mmol/l

4,2

3,2 - 4,2

2,1 - 3,2

0,7 - 2,1

below 0,7

- 7 -

Setting on the

water softener

3 *

no salt is needed