Zanussi ZSF2450 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Lavastoviglie Zanussi ZSF2450. Zanussi ZSF2450 20. Product manaul
Anche per Zanussi ZSF2450: Manuale d'uso (20 pagine), Manuale d'uso (20 pagine)

Stampa la pagina

1. Make a check if the water softener level is correct for

the water hardness in your area. If necessary set the

water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dishwasher.

5. Set the correct washing programme for the type of

load and soil.

Setting the water softener

The water softener removes minerals and salts from the

water supply. Minerals and salts can have bad effect on

the operation of the appliance.

Water hardness is measured in equivalent scales:

• German degrees (dH°).

• French degrees (°TH).

°dH

>24

18- 24

3.2- 4.2

12- 18

2.1- 3.2

4- 12

0.7- 2.1

< 4

1) No use of salt required.

Electronic adjustment

The water softener is set at the factory at level 3.

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons B and C until the

indicator lights of function buttons A, B and C start

to flash.

4. Release function buttons B and C.

5. Press function button A.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of salt

that are not applicable for dishwashers cause

damage to the water softener.

Water hardness

mmol/l

°TH

>4.2

>40

32- 40

19- 32

7- 19

< 0.7

< 7

6. Fill the detergent dispenser with the correct quantity

of detergent.

7. Start the washing programme.

If you use detergent tablets, refer to the chapter 'Use

of detergent'.

• mmol/l (millimol per litre - international unit for the

hardness of water).

• Clarke.

Adjust the water softener to the water hardness in your

area. If necessary, contact your local water authority.

Water hardness

setting

Clarke

> 28

22- 28

13- 22

5 -13

< 5

– The indicator lights for function buttons B and C

go off.

– The indicator light for function button A continues

to flash.

– The digital display shows the current level.

Example: digital display shows

6. Press the function button A one time to increase the

water softener level by one step.

7. Press the on/off button to save the operation.

Digital display

level

= level 3.