Zanussi ZSFN121W1 Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Lavastoviglie Zanussi ZSFN121W1. Zanussi ZSFN121W1 25.

Zanussi ZSFN121W1 Manuale d'uso
With some problems, the dedicated indicator
flashes intermittently to indicate a malfunction and
the alarm code.
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
The appliance does not fill with water.
The indicator
mittently.
The light related to the start button
flashes continuously.
The appliance does not drain the water.
The indicator
termittently.
The light related to the start button
flashes continuously.
The anti-flood device is on.
The indicator
termittently.
The light related to the start button
flashes continuously.
Malfunction of the water level detection
sensor.
The indicator
termittently.
The light related to the start button
flashes continuously.
Malfunction of the wash pump or the drain
pump.
The indicator
termittently.
The light related to the start button
flashes continuously.
18
flashes 1 time inter-
flashes 2 times in-
flashes 3 times in-
flashes 4 times in-
flashes 5 times in-
Possible cause and solution
Make sure that the mains plug is connected to the
mains socket.
Make sure that there is no damaged fuse in the fuse
box.
Make sure that the appliance door is closed.
Press the start button.
If the delay start is set, cancel the setting or wait for
the end of the countdown.
The appliance recharges the resin inside the water
softener. The duration of the procedure is approxi-
mately 5 minutes.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is
not too low. For this information, contact your local
water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clog-
ged.
Make sure that the inlet hose has no kinks or bends.
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clog-
ged.
Make sure that the drain hose has no kinks or
bends.
Close the water tap.
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in
the user manual.
Make sure that the filters are clean.
Switch the appliance off and on.
Switch the appliance off and on.