Zanussi ZEI3921 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura Zanussi ZEI3921. Zanussi ZEI3921 36. Product manaul
Anche per Zanussi ZEI3921: Manuale d'uso (32 pagine), Manuale d'uso (48 pagine), Manuale d'uso (12 pagine), Manuale d'uso (12 pagine)

Stampa la pagina

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• If the fixing bracket is near to the terminal

block, do not let the connection cable come

in contact with the edge of the bracket.

Electrical connection

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug (if ap-

plicable).

• The appliance must not be connected with an

extension cable, an adapter or a multiple

socket. There is a risk of fire.

• Do not let the power cable to heat up to a

temperature of more than 90° C. The cable

should be guided by means of clamps fixed

to the side of the cabinet, in order to avoid

any contact with the equipment beneath the

cooktop.

• Make sure that there is access to the mains

plug after the installation.

Electrical Requirements

Permanent electrical installation must agree with

the latest I.E.E. Regulations and local Electricity

Board regulations. For your own safety the in-

stallation must be done by a qualified electrician

(e.g. your local Electricity Board, or a contractor

who is on the roll of the National Inspection

Council for Electrical Installation Contracting

[NICEIC]).

The manufacturer refuses to be held re-

sponsible, if these safety measures are not

abided by.

Supply connections:

This hob has to be connected to 230 — 240 V

( 50 Hz) electricity supply.

Before carrying out the connection, make sure:

1. The limiter valve and the electrical system

can take the appliance load (see the rating

plate)

2. The supply system is equipped with an effi-

cient earth connection in compliance with

the current standards and regulations

3. The outlet or omnipolar switch used for

connection is easily accessible with the ap-

pliance installed.

www.zanussi.com

The appliance is supplied with a 3 core flexible

power cable requiring a 13 amp plug fitted with

a 13 amp or 3 amp fuse dependent on the load.

You must purchase and install the plug.

The wires in the cord are coloured as follows:

Green and yellow

Blue

Brown

Replacement of the connection cable

1. Connect the green and yellow (earth) wire

to the terminal which is marked with the let-

ter 'E', or the earth symbol

green and yellow.

2. Connect the blue (neutral) wire to the ter-

minal which is marked with the letter 'N' or

coloured blue.

3. Connect the brown (live) wire to the termi-

nal which is marked with the letter 'L' and is

always connected to the network phase.

There must be no cut or stray strands of wire

present. The cord clamp must be correctly at-

tached to the outer sheath.

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to the

voltage load and the working temperature. The

yellow/green earth wire (B) must be approxi-

mately 2 cm longer than the live and neutral wire

(A).

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that the cut off plug is disposed

of safely.

- Earth

- Neutral

- Live

, or coloured