Zanussi ZGF 648 IR Manuale d'uso - Pagina 19

Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura Zanussi ZGF 648 IR. Zanussi ZGF 648 IR 44.

Fitting the hob to the worktop

The hob can be installed in a kitchen

unit with an opening for insertion whose

dimensions are shown in Fig. 8. To

install the hob, proceed as follows:

1. Remove the pan supports, the

burners caps and crowns and turn

the hob upside down, taking care

the

ignition

damaged in this operation.

2. Put the relevant sealings, supplied

with the hob, on the side edges of the

cut out and at 8 mm from the front and

rear edges, as shown in Fig. 9, taking

care that the sealings meet without

overlapping.

3. Place the hob in the cut out, taking

care of its centring.

4. Fix the hob with the relevant screws

(Fig. 10). The traction of the screws is

able to trace the sealing, any excess

of which can then be easily removed.

The edge of the hob forms a double

labyrinth seal which provides a total

guarantee against infiltration of liquids.

candles

are

not

Dimensions are given in millimeters

Fig. 8

Fig. 9

sealing

gasket

Fig. 10