Zanussi ZGG 646 ICN Libretto di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Libretto di istruzioni per Piano cottura Zanussi ZGG 646 ICN. Zanussi ZGG 646 ICN 12.

Building In

This hob can be inserted in a built-in kitchen unit whose

depth is between 550 and 600 mm. The hob

dimensions are shown in Fig. 9.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 100 mm.

Hanging forniture units or hoods must be placed at 650

mm. minimum from the hob.

A = Auxiliary burner

SR = Semirapid burner

R = Rapid Burner

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive seal

must be fitted to the underside outside edge (Fig. 10)

of the hob. It is essential that no gaps are left in this seal

in order to prevent spillage near the hob seeping into

the cabinet below.

1) Remove the pan supports, the burners caps and

crowns and turn the hob upside down, taking care the

ignition candles are not damaged in this operation.

2) Place the sealing gasket all around the glass top

edge as shown in Fig. 10.

3) Fit the hob in the cut out and push it down until the

glass top and the working top come in touch, as shown

in Fig. 11.

FO 2109

Fig. 9

Fig. 10

FO 2107

Fig. 11

a) sealing gasket

Dimensions are given in millimeters

FO 2320