Zanussi ZGG 742 E Libretto di istruzioni - Pagina 10
Sfoglia online o scarica il pdf Libretto di istruzioni per Piano cottura Zanussi ZGG 742 E. Zanussi ZGG 742 E 40. Electronic gas hob
Stampa la pagina
After 60 seconds, you can remove the
safety device on the burner by touching both
the Increasing Controls
Decreasing Control
Then, follow the instructions given in the
paragraph "How to light a burner".
Caution! Check that the burner cap
is correctly positioned (see diagram).
If the ignition problem persists, refer
to chapter "Something not working".
Never use a manual spark gas-lighter
if the burner ignition device does not
work correctly. If necessary, use a
match.
In case of
extinguishing (automatic
reignition)
If the burner flame is accidentally extinguished
(draughts, spilling of liquids, etc.), the gas
flow is immediately interrupted.
After about 20 seconds, the ignition device
automatically repeats the ignition procedure.
Upon reignition, the burner flame is first set
at maximum level, then it is automatically
adjusted to the level set before it was
accidentally extinguished.
If three consecutive reignition attempts fail,
a safety device is set on the burner. The
flame level indicators and the residual heat
indicator flash.
Caution! When the safety device is
set on a burner, the burner controls
cannot be operated for about 60
seconds.
After 60 seconds, you can remove the
safety device on the burner by touching both
the Increasing Controls
Decreasing Control
Then, follow the instructions given in the
paragraph "How to light a burner".
10
and the
at the same time.
accidental
and the
at the same time.
Burner
Cap
Spark
plug
Thermo-
couple