Zanussi ZGG 742 E Libretto di istruzioni - Pagina 30

Sfoglia online o scarica il pdf Libretto di istruzioni per Piano cottura Zanussi ZGG 742 E. Zanussi ZGG 742 E 40. Electronic gas hob

— Connect the blue (neutral) wire to the

terminal in the plug which is marked

with the letter 'N' or coloured black.

— Connect the brown (live) wire to the

terminal in the plug which is marked

with the letter 'L' or coloured red.

Upon completion there must be no cut, or

stray strands of wire present and the cable

clamp must be secure over the outer sheath.

A cut off plug inserted into a 13

amp socket is a serious safety

(shock) hazard. Ensure that the

cut off plug is disposed of safely.

Permanent Connection

In the case of a permanent connection, it is

necessary that you install a double pole

switch between the hob and the electricity

supply (mains), with a minimum gap of 3

mm. between the switch contacts and of a

type suitable for the required load in

compliance with the current electric

regulations.

The switch must not break the yellow and

green earth cable at any point.

Ensure that the hob supply cable

does not come into contact with

surfaces with temperatures higher

than 50 deg. C.

Supply cable replacement

The cable used to connect the hob to the

electrical supply must comply to the

specifications given below.

Min. size Cable/flex Cable / flex type Fuse

0.75 mm

H05 V2V2-F (T90) 3 A