Zanussi ZGG67412 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura Zanussi ZGG67412. Zanussi ZGG67412 16.
Anche per Zanussi ZGG67412: Manuale d'uso (16 pagine), Manuale d'uso (32 pagine)

Stampa la pagina

• Be very careful when you replace the

pan supports to prevent the hob top

from damage.

After cleaning, dry the appliance with a soft

cloth.

Removing the dirt:

1. – Remove immediately: melting plastic,

plastic foil, and food containing sugar.

– Stop the appliance and let it cool

down before you clean: limescale rings,

water rings, fat stains, shiny metallic dis-

colorations. Use a special cleaner appli-

cable for surface of hob.

2. Clean the appliance with a damp cloth and

some detergent.

3. At the end rub the appliance dry with a

clean cloth.

Troubleshooting

Problem

There is no spark when lighting the

gas

The flame is blow out immediately

after ignition

The gas ring burns unevenly

If there is a fault, first try to find a solution to the

problem yourself. If you cannot find a solution to

the problem yourself, speak your dealer or the

local Service Force Centre.

If you operated the appliance incorrectly, or

the installation was not carried out by a

registered engineer, the visit from the customer

service technician or dealer may not take place

free of charge, even during the warranty period.

The stainless steel can become tarnished if it is

too much heated. Refer to this you must not

cook with potstones, earthenware pans or cast

iron plates.

Cleaning of the spark plug

This feature is obtained through a ceramic igni-

tion candle with a metal electrode. Keep these

components well clean to prevent difficult light-

ing and check that the burner crown holes are

not obstructed.

Periodic maintenance

Periodically speak your local Service Force

Centre to check the conditions of the gas sup-

ply pipe and the pressure adjuster, if fitted.

Possible cause

• There is no electrical supply

• Burner cap and crown are

placed uneven

• Thermocouple is not heated suf-

ficient

• Burner crown is blocked with

food residues

These data are necessary to help you

quickly and correctly. These data are

available on the supplied rating plate.

• Model description .................

• Product number (PNC) .................

• Serial Number (S.N.) .................

Use the original spare parts only. They are avail-

able at Service Force Centre and approved

spare parts shops.

Remedy

• Make sure that the unit is con-

nected and the electrical supply

is switched on.

• Control the fuse. If the fuse is

released more than one time, re-

fer to a qualified electrician.

• Make sure that the burner cap

and crown are in correct posi-

tions.

• After lightning the flame, keep

the knob pushed for equal or

less than 10 seconds.

• Make sure that the injector is

not blocked and the burner

crown is clear of food particles.