Zanussi ZGG67412 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura Zanussi ZGG67412. Zanussi ZGG67412 32.
Anche per Zanussi ZGG67412: Manuale d'uso (16 pagine), Manuale d'uso (16 pagine)

Stampa la pagina

Installation

WARNING!

Only a qualified person must install

this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied

with the appliance.

• Keep the minimum distance from the other

appliances and units.

• Always take care when moving the appliance

as it is heavy. Always use safety gloves and

enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance adjacent to a

door or under a window. This prevents hot

cookware to fall from the appliance when the

door or the window is opened.

• If the appliance is installed above drawers

make sure that the space, between the

bottom of the appliance and the upper

drawer, is sufficient for air circulation.

• The bottom of the appliance can get hot.

Make sure to install a non-combustible

separation panel under the appliance to

prevent access to the bottom.

Electrical Connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can make

the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot appliance

or hot cookware, when you connect the

appliance to the near sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• If the mains socket is loose, do not connect

the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

Gas connection

• All gas connections should be made by a

qualified person.

• Before installation, make sure that the local

distribution conditions (nature of the gas and

gas pressure) and the adjustment of the

appliance are compatible.

• Make sure that there is air circulation around

the appliance.

• The information about the gas supply is on

the rating plate.

• This appliance is not connected to a device,

which evacuates the products of

combustion. Make sure to connect the

appliance according to current installation

regulations. Pay attention to requirements

regarding adequate ventilation.