Zanussi ZGO68330BA Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura Zanussi ZGO68330BA. Zanussi ZGO68330BA 17.

Stampa la pagina

•

Scratches or dark stains on the surface have no

effect on how the hob operates.

•

Use a special cleaner suitable for the surface of

the hob.

WARNING! Do not use knives,

scrapers or similar instruments to

clean the surface of the glass or the

rims of the burners and the frame (if

applicable).

•

Wash stainless steel parts with water, and then

dry them with a soft cloth.

PAN SUPPORTS

The pan supports are not resistant to

washing in a dishwasher. They must

be washed by hand.

1. Remove the pan supports to easily clean the

hob.

Be very careful when you replace

the pan supports to prevent the

hob top from damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash the

pan supports by hand and dry them. If

necessary, remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make sure

that the arms of the pan supports are inserted

in the recesses of the enamelled plates.

REMOVING AND ASSEMBLING PAN

SUPPORTS

After cleaning of the hob, make sure that pan

supports are in a correct position. In order to place

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

a pan support properly, make sure that its arms fits

the cut-outs placed at the base of the burner as

shown in the picture. This way, a pan support is

stable and fixed.

CLEANING THE HOB

•

Remove immediately: melted plastic, plastic

foil, sugar and food with sugar, otherwise, the

dirt can cause damage to the hob. Take care to

avoid burns.

•

Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny

metallic discoloration. Clean the hob with a

moist cloth and a non-abrasive detergent. After

cleaning, wipe the hob dry with a soft cloth.

•

To clean the enamelled parts, caps and crowns,

wash them with warm soapy water and dry them

carefully before you put them back on.

CLEANING THE SPARK PLUG

This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these

components well clean to prevent difficult lighting

and check that the burner crown holes are not

obstructed.

PERIODIC MAINTENANCE

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.