Zanussi ZVT 64 N Informazioni sull'utente - Pagina 14

Sfoglia online o scarica il pdf Informazioni sull'utente per Piano cottura Zanussi ZVT 64 N. Zanussi ZVT 64 N 48. Ceramic glass hob

Stampa la pagina

Installation Instructions

Safety instructions

Warning! This must be read!

The laws, ordinances, directives and standards

in force in the country of use are to be followed

(safety regulations, proper recycling in accord-

ance with the regulations, etc.)

Installation may only be carried out by a quali-

fied electrician.

The minimum distances to other appliances

and units are to be observed.

Anti-shock protection must be provided by the

installation, for example drawers may only be

installed with a protective floor directly under-

neath the appliance.

The cut surfaces of the worktop are to be pro-

tected against moisture using a suitable seal-

ant.

The sealant seals the appliance to the work top

with no gap.

Do not use silicon sealant between the appli-

ance and the work top.

Avoid installing the appliance next to doors and

under windows. Otherwise hot cookware may

be knocked off the rings when doors and win-

dows are opened.

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of volt-

age.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by installing

correctly.

• The appliance must be connected to the

electrical supply by a qualified electrician.

Risk of injury from electrical current.

• Loose and inappropriate plug and socket

connections can make the terminal overheat.

• Have the clamping connections correctly in-

stalled by a qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase

connection, the appropriate mains cable of

type H05BB-F Tmax 90°C(or higher) or an

equivalent type must be used.

• If this appliance's mains cable is damaged, it

must be replaced by a special cable (type

H05BB-F Tmax 90°C; or higher) or an equiv-

alent type. The latter is available from the

Customer Care Department.

A device must be provided in the electrical in-

stallation which allows the appliance to be dis-

connected from the mains at all poles with a

contact opening width of at least 3 mm.

Suitable isolation devices include line protect-

ing cut-outs, fuses (screw type fuses are to be

removed from the holder), earth leakage trips

and contactors.