Zanussi DV 35 Istruzioni per l'uso e la cura - Pagina 8

Sfoglia online o scarica il pdf Istruzioni per l'uso e la cura per Congelatore Zanussi DV 35. Zanussi DV 35 32. Freezer
Anche per Zanussi DV 35: Manuale di istruzioni per l'uso e la cura (33 pagine), Manuale di istruzioni per l'uso e la cura (32 pagine)

INSTALLATION

WARNING:

IF YOU ARE DISCARDING AN OLD

APPLIANCE THAT HAS A LOCK OR

CATCH ON THE DOOR, PLEASE ENSURE

THAT IT IS MADE UNUSABLE TO

PREVENT YOUNG CHILDREN BEING

TRAPPED INSIDE.

The appliance should be gently pushed into

place until the top rear ventilation grill touches

against the wall. (See Fig. 1).

When in position, if a 20mm (3/4") clear gap

above the appliance is not available, gaps of

25mm (1") should be maintained on both sides

of the appliance, this is to provide sufficient air

circulation. Always ensure that ventilation is

kept clear. If the ventilation is blocked by tea

towels etc., this will cause the appliance to

work incorrectly.

Fig. 2

Before switching on, make sure that the voltage

of your mains supply is the same as that stated

on the rating plate. This is located inside the

cabinet behind the bottom drawer.

At first you may be aware of sounds in your

kitchen which you are not used to, particularly if

your appliance is against sound-reflective

surfaces such as tiled or painted walls. Please

remember the cooling unit includes precision

built components which, like those in car

engines and other machinery with fast moving

parts, need a running in period which may last

several weeks. During this period, don't worry,

just allow the appliance time to settle down.

Your appliance will be heavy when loaded with

food and must therefore be stood on a strong

firm floor, which must be level.

Adjust the level by screwing out the appropriate

level adjusters in the front feet using your fingers

or a 25mm (1") spanner (See Fig. 2).

Level adjusters are also available in the rear feet

in the event of excessive floor unevenness.

Make sure the appliance is upright and level so

that it does not move and is stable.