Zanussi ZBF22451SA Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Congelatore Zanussi ZBF22451SA. Zanussi ZBF22451SA 16.
Anche per Zanussi ZBF22451SA: Manuale d'uso (16 pagine), Manuale d'uso (16 pagine), Manuale d'uso (17 pagine), Manuale d'uso (45 pagine)
Stampa la pagina
x
1
If necessary cut
the adhesive sealing
strip and then apply it
to the appliance as
shown in figure.
2
1
3
Install the appliance in
the niche.
Push the appliance in
the direction of the ar-
rows (1) until the up-
per gap cover stops
against the kitchen
furniture.
Push the appliance in
the direction of the ar-
rows (2) against the
cupboard on the op-
posite side of the
hinge.
www.zanussi.com
13mm
Ø 2,5
x
2
Drill the unit us-
ing a Ø 2.5 mm drill
(10 mm max. pene-
tration).
Fix the square fitting
to the appliance.
4mm
44mm
4
Adjust the appli-
ance in the niche.
Make sure that the
distance between
the appliance and
the cupboard front-
edge is 44 mm.
The lower hinge
cover (in the acces-
sories bag) makes
sure that the dis-
tance between the
appliance and the
kitchen furniture is
correct.
Make sure that the
clearance between
the appliance and
the cupboard is 4
mm.
Open the door. Put
the lower hinge
cover in position.
I
I
5
Attach the appli-
ance to the niche with
4 screws.
C
D
E
E
B
7
Attach the covers
(C, D) to the lugs and
the hinge holes.
Install the vent grille
(B).
Attach the hinge cov-
ers (E) to the hinge.
50 mm
90°
21 mm
21 mm
50 mm
9
Install the part (Ha)
on the inner side of
the kitchen furniture.
6
Remove the cor-
rect part from the
hinge cover (E).
Make sure to re-
move the part DX,
in the case of right
hinge, SX in oppo-
site case.
Ha
Hb
Hc
Hd
8
Disconnect the
parts (Ha), (Hb),
(Hc) and (Hd).
Ha
Hc
10
Push the part
(Hc) on the part
(Ha).
11