Zanussi ZFG06500WA Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Congelatore Zanussi ZFG06500WA. Zanussi ZFG06500WA 44.

Stampa la pagina

• Do not use mechanical devices or other means to accelerate

the defrosting process, other than those recommended by the

manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances inside the food storage

compartments of the appliance, unless they are of the type

recommended by the manufacturer.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

• Do not store explosive substances such as aerosol cans with

a flammable propellant in this appliance.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarlyqualified persons in

order to avoid a hazard.

Safety Instructions

Installation

WARNING!

Only a qualified person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied with

the appliance.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety

gloves.

• Make sure the air can circulate around the

appliance.

• Wait at least 4 hours before connecting the

appliance to the power supply. This is to allow

the oil to flow back in the compressor.

• Do not install the appliance close to radiators

or cookers, oven or hobs.

• The rear of the appliance must stand against

the wall.

• Do not install the appliance where there is

direct sunlight.

www.zanussi.com

• Do not install this appliance in areas that

are too humid or too cold, such as the

construction appendices, garages or wine

cellars.

• When you move the appliance, lift it by the

front edge to avoid scratching the floor.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• The appliance must be earthed.

• All electrical connections should be made by a

qualified electrician.

• Make sure that the electrical information on

the rating plate agrees with the power supply.

If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the electri-

cal components (e.g. mains plug, mains cable,