Zanussi ZRB23200XA Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Congelatore Zanussi ZRB23200XA. Zanussi ZRB23200XA 14.

Stampa la pagina

Daily use

Do not place hot items near the plastic

components of this appliance.

Do not store flammable gas and liquid in

the appliance , because they may explode.

Do not place food products directly against

the air outlet on the rear wall.

Frozen food must not be re-frozen once it

has been thawed out.

Store pre-packed frozen food in accordance

with the frozen food manufacture s instruc-tions.

The appliances manufactures storage

recomm-endations should be strictly

adhered to. Refer to relevant instructions.

Do not place carbonated or fizzy drinks in

the freezer compartment as it creates press-

ure on the container , which may cause it to

explode , resulting in damage to the appliance.

Ice lollies can cause frost burns if consum-

ed straight from the appliance.

Care and cleaning

Before maintenance , switch off the appliance

and disconnect the mains plug from the

mains socket.

Do not clean the appliance with metal ob-

jects.

Do not use sharp objects to remove frost

from the appliance. Use a plastic scraper.

Installation

Important For electrical connection carefully

follow the instructions given in this instruction

manual.

Unpack the appliance and check if there are

damages on it. Do not connect the applian-

ce if it is damaged. Report possible damag-

es immediately to the place you bought it.In

Control Panel

Temperature Control Slider in refrigerator chamber

The temperature control slider is used to adjust

the refrigerator and freezer temeperature, the

slide on the thermostat is used to balance the

distribution of air flow volume of each compart-

ment. When the slider is turned down there will

be more air flow in the refrigerator and less air

flow in the freezer, so the refrigerator will be

cool faster. For normal operating use, keep the

slider in the centre normal position. You should

not need to adjust the temperature control dial if

the slider is kept at the normal setting.

Turning on the appliance and setting the thermostat

If it gets too cold in the chilled chamber with

the switch on "Min", just turn the switch back to

"normal", if the temperature gets higher in the

chilled chamber with the switch on "Max", just

turn the switch to "normal".

You switch on your appliance by connecting it to

your mains supply and setting the thermostat, the

thermostat control knob is located at the top.

www.zanussi.com

this case retain packing.

It is advisable to wait at least four hours

before connecting the appliance to allow the

oil to flow back in the compressor.

Adequate air circulation should be around

the appliance to prevent overheating.

achieve sufficient ventilation follow the

i nstructions relevant to installation.

Wherever possible the back of the product

should be against a wall to avoid touching

or catching warm parts (compressor , conden-

ser) to prevent

The appliance must not be located close to

radiators or cookers.

Make sure that the mains plug is accessible

after the installation of the appliance.

Service

Any electrical work required to do the serv-

icing of the appliance should be carried out

by a qualified electrician or competent per-

son.

This product must be serviced by an autho-

rised Service Centre , and only genuine spare

parts must be used.

Environment protection

Wind path parts in refrigerator

The thermostat automatically regulates the

temperature interior refrigerator chamber and

freezer chamber, depending on what number you

have turned the thermostat control knob to:

1. If the ambient temperature is a higher

temperature (in summer), please set the

control knob at "5, 6 or 7" positing.

2. If the ambient temperature is a lower tempera-

ture (in winter), please set the control knob

at the "1 or 2" position.

3. please set the control knob at the 3 or 4

position for normal temperature conditions.

the risk of a fire

This appliance does not contain gasses

which could damage the ozone layer , in

either its refrigerant circuit or insulation

materials. The appliance shall not be dis-

carded together with the urban refuse and

rubbish. The insulation foam contains fla-

mmable gases: the appliance shall be

disposed according to the appliance regu-

lations to obtain from your local authorit-

ies. Avoid damaging the cooling unit , esp-

ecially at the rear near the heat exchang-

er. The materials used on this appliance

marked by the symbol

are recyclable.

Knob