Zanussi ZU 790 F Libretto di istruzioni - Pagina 16

Sfoglia online o scarica il pdf Libretto di istruzioni per Congelatore Zanussi ZU 790 F. Zanussi ZU 790 F 16.
Anche per Zanussi ZU 790 F: Libretto di istruzioni (16 pagine)

Stampa la pagina

Once the top of the panel has been correctly

positioned, fix it through the holes in the bottom

bracket, without tightening the screws.

Check the position again by slackening the screws

and pins then, once the best position has been

obtained, fully tighten all the fixings. Cover the visible

part of the top bracket on the panel with plastic cover

(D), inserting it in the locations provided in the

bracket.

Once the door has been correctly aligned, tighten

the holding nuts on the fixing brackets and attach the

appliance to the adjacent units and the bottom of the

work surface.

For a correct installation operation if the base plate is

more than 100 mm (for cavity height 820 mm) or

more than 150 mm (for cavity height 870 mm) you

must cut out the plate as shown in Figure.

D471

D472

D517

D593