Zanussi EC 9614-A Istruzioni per l'uso e la cura - Pagina 16
Sfoglia online o scarica il pdf Istruzioni per l'uso e la cura per Fornelli Zanussi EC 9614-A. Zanussi EC 9614-A 24. Zanussi electric cooker instructions for use & care
Anche per Zanussi EC 9614-A: Manuale di istruzioni per l'uso e la cura (24 pagine)
Stampa la pagina
Shelves and Shelf supports
To clean the chrome parts of the oven,
soak in warm detergent water and remove
stubborn marks with a well wetted soap
impregnated pad. Rinse well and dry with
a soft cloth. Do not use abrasive scourers
or steel wool.
Oven cavity
The enamelled oven cavity is best cleaned
whilst the oven is still warm.
It is preferable/advisable to wipe the oven
over with a soft cloth soaked in warm
soapy water after each use. However,
from time to time it will be necessary to
do a more thorough cleaning, using a
proprietaiy oven cleaner, do not use
aerosol oven cleaners, abrasive scourers or
steel wool.
Special oven linings
(Optional accessory kit)
On the interior walls of this oven model
it is possible to fit coated liners.
These are known as «stay clean» or «easy
care». To obtain the maximum efficiency
from your liners follow the guide lines
carefully for their use and care.
The linings are coated with a special
substance which helps to clean itself by a
process of oxidization. Although the
linings will not remain absolutely spotless
they will reduce your oven cleaning
chores considerably when used in the
correct way.
The linings work most effectively if the
splashes are kept to a minimum, and the
soil is not allowed to build up, as this will
retard the cleaning action. If the oven has
16
been used at low temperatures it is
advisable to heat the oven for one hour
on 200''C.
Never use abrasive wools or pads or an
aerosol oven cleaner on the coated linings.
Removing the oven panels
The oven linings can be removed for a
more thorough cleaning of the oven.
To do this:
Unscrew the ring nuts securing the shelf
supports (Fig. 8), remove the supports
and then remove the side panels after
sliding them out of their retaining pins
(Fig. 9), pull out the top panel.
Fig. 8