Directed Directechs DB3 Manuale di installazione - Pagina 12

Key2GO

This feature is mandatory to control the immobilizer override in this firmware.

Key2GO has been designed and developed to bypass the advanced encryption layers found in modern vehicles. It uses an array of servers

to generate a duplicate of the original key, allowing the installation of a remote starter without having to give up a key.

The advantage is that this feature allows you to use one original key and the server to configure the bypass in the vehicle.

All Key2GO-compatible firmware are clearly indicated in the function list of each vehicle search result page and will also appear on the

flash page. Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the

registration process, such as your Directed account number and store name.

Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.

Refer to the Module Programming section of this guide for instructions on how to program features using Key2GO.

Important!

Make all the required connections to the vehicle, as described in this guide, and double-check to ensure everything is in order before

moving onto the programming.

Warning! To take advantage of advanced features, you must use DirectLink 4.5 (and higher) or the Directechs Mobile application.

To flash a module using your computer:

Connect the interface module to your computer using the XKLoader2.

2. Go to www.directechs.com using Internet Explorer, and select Flash Module.

3. Follow the instructions to select your vehicle, installation type, and configure your options.

4. When you have configured the firmware options, click FLASH.

To flash a module using your smartphone or tablet:

Connect the interface module to your XKLoader3.

2. Launch the Directechs mobile app on your smartphone or tablet.

3. Select FLASH YOUR MODULE and follow the onscreen instructions.

When the flashing operation is successful, you can proceed with the instructions below.

D2D installation

Recommended: Connect the 10-pin, 12-pin and 14-pin harnesses to the module, then connect the

4-pin D2D harness.

W2W installation

If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin

harness to the module.

403.SUBARU1 1.38 2008 Subaru Impreza

(12-pin)

(D2D)

(10-pin)

(14-pin)

(12-pin)

(10-pin)

(14-pin)