Zanussi ZCG94396XA Manuale d'uso - Pagina 25

Sfoglia online o scarica il pdf Manuale d'uso per Fornelli Zanussi ZCG94396XA. Zanussi ZCG94396XA 29.

2. Carefully remove from the burner the

thermocouple A. Next remove the spark plug B.

3. Unscrew the screw and slowly pull out the

burner.

4. Release the burner injector with a 7 mm socket

spanner and replace it with a right one.

Assemble the burner in a revers sequence.

Replace the gas type sticker near the gas supply

ramp with the one related to the new gas type.

ADJUSTING THE MINIMUM GAS LEVEL ON

THE OVEN BURNER

1. Disconnect the appliance from the electricity.

2. Remove the knob for the oven functions. If

there is no access to the bypass screw

dismount the control panel before adjustment

start.

3. With a thin and flat screwdriver adjust the

bypass screw A.

The model determines the position of the

bypass screw A.

Changing from natural gas to liquid gas

1. Fully tighten the bypass screw.

2. Put the knob back.

3. Connect the appliance to the electricity.

Changing from liquid gas to natural gas

1. Unscrew approximately one turn the bypass

screw position A.

2. Put the knob for the oven functions back.

3. Connect the appliance to the electricity.