Zanussi ZL 55 Libro di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Libro di istruzioni per Fornelli Zanussi ZL 55. Zanussi ZL 55 24.

Stampa la pagina

The safety equipment

There should be at least 40 cm of worktops on both sides

of the cooker

(

SEE PICTURE

installed with a wall or a tall kitchen unit on one side and

a worktop on the other.

Child safety is further improved if the following

equipment is fitted/in use:

Non-tip device

The non-tip device should be fitted, to prevent the

cooker from tipping if subjected to an abnormal

loading. The non-tip device can only provide pro-

tection when the cooker is pushed into its normal

position.

Before fitting the non-tip device, make sure the cooker has

been levelled and adjusted to the correct plinth height (see

"Installation" on p. 15).

Draw a line on the wall – after levelling the

cooker – along the top edge of the hob (see illus-

tration).

The measurements shown can be applied

whether the non-tip device is fitted on the left or

the right (see illustration). Measure and mark

where the non-tip device is to be placed, then

screw it onto a solid material or a suitable rein-

forcement or fixings.

! If the space between kitchen units is wider than

NOTE

the cooker, you will need to alter the measurements

shown in the illustration if the cooker is to be centred.

If you alter the measurements, remember to

align the cooker correctly when pushing it into

place, so that the non-tip device enters the hole

on the cooker rear.

The hob guard (optional accessory)

The hob guard should be fitted to make it harder

for children to reach pans on the hob.

Press the plugs into the front holes.

Place the guard on the cooker with the plugs over the

edge of the hob.

Angle the guard downwards and then back upwards

so the edges on its two sides engage under the edge

of the hob.

Lock it in place with the rear plugs.

. Alternatively the cooker can be

)

The safety equipment

min. 40 cm

35-65 mm

55-60 mm

min. 40 cm