Califone PABT31 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Lettore multimediale Califone PABT31. Califone PABT31 17. Bluetooth speaker

Listening to Music

1. After the Bluetooth connection is established, you can begin to enjoy your

wireless music

2. Start playback on the Bluetooth device, then adjust the volume.

Auto sleeping

The system automatically turns into sleep mode after about 30 minutes if there

is no Bluetooth or Aux in connection.

Using Hands-free Calling While Listening to Music

To call

With a Bluetooth-enabled phone. Check that a dial tone is heard on the system

and talk using the microphone. If no dialing tone is heard, short press the (call)/

pause button on the system and try again.

To receive a call

When an incoming call arrives when listening, the playback pauses and a ring

tone is heard from the PABT31. Short press the (call) button on the system and

talk using the microphone.

Tips

If no ring tone is heard from when incoming call arrives, stop the playback and

press the (call) button to talk. During a call, press the VOLUME –/+ buttons on the

PABT31 to adjust the volume.

Keep your mobile at least 2' away from the speaker as noise may result if too

close.

To end a call

Press the (call) button. If you were listening to music when the call arrived, it will

resume when the call is finished.

EQ Setting to choose Sound Effect

• Press the EQ button to select your desired sound effect.

• When pressing the EQ button, the Illumination lamp (blue) will flash as following:

• Once to enter MEGA Bass effect

• Twice to enter Surround Sound effect

• You can switch between effects by repeatedly pressing the EQ button.

Listening to Music Via the Aux in

(3.5mm audio cable)

1. Turn on the system.

2. Connect the device to the PABT31 via an audio cable, mode indicator lights off

3. Operate the connected device.

Set the volume of the connected device to a moderate level, then press the VOL-

UME –/+ buttons on the system.

Note: Bluetooth is not available when a device is connected to the Aux in.