Blackberry Radar H2 Manuale di installazione - Pagina 26

Sfoglia online o scarica il pdf Manuale di installazione per Radar Blackberry Radar H2. Blackberry Radar H2 30. Dry van, insulated trailers roll-up doors
Anche per Blackberry Radar H2: Manuale di installazione (33 pagine), Manuale di installazione (26 pagine), Manuale di installazione (25 pagine), Manuale di installazione (32 pagine), Manuale di installazione (33 pagine), Manuale di installazione (34 pagine), Manuale di installazione (35 pagine), Manuale di istruzioni (33 pagine), Manuale di installazione (32 pagine), Manuale di installazione (26 pagine), Manuale di installazione (25 pagine), Manuale di installazione (28 pagine)

Stampa la pagina
Blackberry Radar H2 Manuale di installazione
26
BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE
Threaded fastener selection considerations
Well nuts are threaded fasteners, with a metal insert encased in rubber. When a bolt
•
is inserted and tightened, the fastener compresses, gripping the rear surface of the
mounting surface. At the same time, the rubber casing provides added protection
against water entering the hole on the door. The diagram below shows how the well
nut works.
Well nuts require no special tools to install, and can be easily removed from the
installation when no longer required.
As you will need to supply four fasteners, you may determine which fastener is most
suitable for your needs. Note: Your choice of fastener will influence the size of the tools
required to create the mounting holes (i.e. drill bits) and install or remove the fasteners (i.e.
wrenches/sockets/drivers). Likewise, the actual length of the fasteners will be determined
by the thickness of your mounting surface and the fasteners selected. An example of this
provided below.
IMPORTANT: The maximum fastener thread
diameter supported by this product is ¼" or
M6 (6 mm).
For most secure fastening, we do not
recommend using fasteners with a diameter
less than that of a ¼" or M6 fastener.
Cargo Van Doors
(with no rear access)
2 bolts and well nuts
Bolt: 7/16" head, 1/4"-20 thread, 1-1/2" length
Well Nut Insert: 1/4"-20 thread
Drill Bit
1/2" (13mm)
Nut Driver/Socket/Wrench