Clarke 6500403 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Sander Clarke 6500403. Clarke 6500403 15. Belt/disc sander
Stampa la pagina
Maintenance
IMPORTANT!
Whenever making adjustments or carrying out maintenance tasks, ALWAYS
switch OFF the machine and disconnect from the power supply.
1. Changing the Sanding Belt
1.1 Remove the belt table completely by
unscrewing and removing the table
locking lever.
1.2 Remove the two side cover securing screws
(9A), followed by the upper roller pivot
screw (9B), then pull off the side cover.
10
1.5 Turn the belt by hand and observe how it moves on the rollers, indicated
by its position on the support. This will determine whether not it is
tracking correctly. If it moves sideways, turn the adjuster - 10C, so that it
stabilises over the middle of the support.
At this point the belt is tracking properly. The belt is tensisioned
automatically and cannot be adjusted.
NOTE:
Turning the adjuster clockwise will cause the belt to move one
way...turning it anticlockwise and it will have the opposite effect.
2. Changing the Disk
2.1 Remove the disk table and lower cover/dust extraction port (see fig.5)
2.2 Slacken the two screws securing the upper disk cover and slide it backwards.
2.3 Using a sharp instrument, tease off a portion of the sanding disk, sufficient
for it to be grasped by hand and peeled off.
Remove all residual adhesive, and finally clean the disk with a solvent.
2.4 Peel the backing from the replacement sanding disk and fix to the disk
ensuring it is centralised. Press it firmly to ensure it is secure.
2.5 Replace the table and lower disk cover, and adjust gap between table
and disk, by positioning abd securing the upper disk cover.
1.3 Turn Adjuster (10C) anticlockwise
sufficiently for the sanding belt to
be slipped off the rollers.
1.4 Replace the sanding belt ensuring
it is central about the rollers, and
the arrow (10D) is pointing down
towards he table.
11
9