Aleko AR 900 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Apriporta Aleko AR 900. Aleko AR 900 16. Sliding gate operator

Fit the plastic rack reinforced with steel

1. Start with gate in closed position

2. There are four sections of plastic rack which is one meter length, each section for standard package. (you

can order extra rack from dealer if necessary)

2. Put one end of rack section on the gear of operator as a temporary support.

Make rack level and mark the rack's mounting holes on the gate.

3. Fit the rack by self-threading screws. This kind of plastic rack is quieter and allows height adjustments to

be made even after it has been fixed. Please keep 1.0mm space between the rack and the gear to avoid the

weight of the gate leaf effect on the operator.

Important:

* Check that the rack teeth must engage the gear teeth throughout their full thickness. If not, adjust the

position of the operator or/and place a few shims between the rack and gate.

4. Manually slide the gate leaf to ensure the rack is proper on the gear of operator.

5. Repeat same steps of first rack section to install the rest rack sections until proper length is reached.