California Air Tools 255C Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Apparecchiature industriali California Air Tools 255C. California Air Tools 255C 7. 2.5 gallon pressure pot

Stampa la pagina

Trouble Shooting

WARNING:

If any of the following symptoms appears during your operating, stop using the tool immediately, or

serious personal injury could result.

Only a qualified persons or an authorized service center can perform repairs or replacement of tool.

Disconnect tool from air supply before attempting repair or adjustment. When replacing O-rings or

Cylinder, lubricate with air tool oil before assembly.

PROBLEMS

Air escaping from port on

regulator cap

Pressure dropping slowly

on gauge.

Air leak at the lid gasket.

Gauge not registering air

pressure.

Safety valve popping off.

Note: Repairs should be carried out by a qualified person.

POSSIBLE CAUSES

Broken or damaged

diaphragm in regulator.

Dirty or work valve seat in

regulator.

Defective lid gasket.

Thumb screw not tight.

Defective air gauge.

Tank pressure to high.

Defective valve.

CORRECTION

Replace regulator

Replace lid gasket.

Tighten thumb screws.

Replace air gauge

Reduce tank pressure to 20-50 PSI.

Replace safety valve.