Directed Electronics 410 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Allarme auto Directed Electronics 410. Directed Electronics 410 20. Dei automate 410: owners guide
Anche per Directed Electronics 410: Manuale d'uso (20 pagine)

Stampa la pagina

Using Your System

Arming/Locking

Pressing

for one second will arm the system and lock the

doors. The red LED will begin to flash once per second. The

Failsafe® Starter Kill will prevent the vehicle's starter from crank-

ing if it has been installed. If connected, the vehicle's horn will

honk and the parking lights will flash once to confirm arming of

the system. If the ignition is turned on while the system is armed

the horn will honk and the parking lights will flash (if connected).

NOTE: You must use your remote transmitter to lock the vehicle in order

for the system to be armed. Manually locking the vehicle does not arm

the system; it will only lock the doors. If you have not used the remote

transmitter to lock the vehicle doors (i.e. the vehicle has been locked using

the lock/unlock switch) the transmitter cannot be used to unlock the doors.

The system also can be programmed to arm the starter kill auto-

matically (called passive mode). If the system is programmed for

passive mode, it will automatically activate the starter kill 30 sec-

onds after the ignition is turned off. Passive mode is indicated by

rapid flashing of the LED after the ignition is turned off.

NOTE: For passive mode to be effective, the Failsafe® Starter Kill relay

must be installed.

If passive mode is programmed on, it is also possible to program

the system to lock the doors automatically. This is called passive

locking. If passive locking is turned on, care must be taken to pre-

vent the keys from being locked in the vehicle.

1999 Directed Electronics, Inc.