Clarke 7239230 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Pompa dell'acqua Clarke 7239230. Clarke 7239230 13. Submersible pump
Stampa la pagina
INSTALLING THE PUMP
Remove all packaging and make sure that the pump has no visible damage.
Dispose of all packaging appropriately.
FITTING THE ELBOW
1. Screw one of the elbows into the
outlet port as shown. Two elbows
are supplied;
• Threaded elbow
• Push-fit elbow
FITTING THE STEPPED ADAPTER
The stepped hose adaptor supplied is
designed to be used for either screw
type hose connection or push fit.
• Stepped adapter 1" (25mm) /
1. Screw the adaptor to the
threaded elbow and connect a
suitable hose (not supplied) to
either the screwed end or push-fit
• Suitable hoses are available
from your local Clarke dealer.
• The stepped adaptor can be
cut off with a hacksaw if a
larger hose is to be used.
2. Trim the adaptor to size if required.
• Reducing the hose diameter will affect the maximum flow rate.
3. When push fitting the hose to the adaptor or elbow, use a jubilee clip to
secure it. Do not overtighten.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
¾
"(20mm) hose
6