Directed Electronics Hornet 719T Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Allarme auto Directed Electronics Hornet 719T. Directed Electronics Hornet 719T 20. Directed electronics owner's guide vehicle security system 719t

Stampa la pagina

ting is achieved, the siren will emit two short chirps followed

by a long chirp. When the minimum setting (full trigger off)

is achieved, the siren will emit one short chirp followed by a

long chirp.

NOTE: If more than five seconds elapse without an adjustment, shock

sensor adjustment mode will be exited. Repeat steps 1 through 3 to make

additional adjustments. The siren will generate one long chirp followed

by two short chirps when the shock sensor adjustment mode has been

exited.

Code Hopping

The receiver and transmitters each use a mathematical formula

called an algorithm to change their code each time the transmit-

ter is used. This technology has been developed to increase the

security of the unit. The control unit knows what the next codes

should be. This helps to keep the transmitter synchronized with

the control unit even if you use the remote control out of range

of the vehicle. However, if the transmitter has been pressed many

times out of range of the vehicle, or the battery has been removed,

it may get out of sync with the control unit and fail to operate the

system. To resynchronize the remote control simply press

the remote control several times within range of the vehicle. The

alarm will automatically resynchronize and respond to the trans-

mitters normally.

1999 Directed Electronics, Inc.

™