Alemite 8571-A5 Manuale di servizio - Pagina 6

Sfoglia online o scarica il pdf Manuale di servizio per Pompa dell'acqua Alemite 8571-A5. Alemite 8571-A5 10. Portable hand-operated pump

Stampa la pagina

SER 8571-5

Overhaul

Prior to performing any maintenance procedure, the

following safety precautions must be observed. Personal

injury may occur.

WARNING

Do not use halogenated hydrocarbon sol-

vents such as methylene chloride or 1,1,1-trichlor-

ethane in this pump. An explosion can result

within an enclosed device capable of containing

pressure when aluminum and/or zinc-plated parts

come in contact with halogenated hydrocarbon

solvents.

Never point a nozzle at any portion of your body or

another person. Accidental discharge of pressure

and/or material can result in injury.

Read each step of the instructions carefully. Make

sure a proper understanding is achieved before

proceeding.

Disassembly

NOTE: Refer to Figures 2 - 4 for compo-

nent identification on the following proce-

dures.

Material Hoses from Meter

1. Unscrew Material Hose (1) from Electronic Meter (2).

2. Remove Capscrews (5), Lock Washers (15), and

Nuts (16) that secure Pump Tube Assembly (4) to

Cover (14).

• Remove the Pump Tube Assembly from the Cover.

3. Unscrew the Electronic Meter from Nipple (3).

4. Remove Nozzle Assembly (22) from Material Hose

(24) as required.

5. Unscrew both Material Hoses from Filter

Assembly (23).

Nozzle (Non-Drip Manual)

NOTE: The Nozzle is serviced as an assem-

bly only.

Revision (12-09)

1-800-548-1191-http://[email protected]

Portable Hand-Operated Pump

Fluid Filter

Figure 4

6. Unscrew Spring and Adapter Assembly (43) from

Body (39).

7. Remove O-Ring (42) from the Spring and Adapter

Assembly.

8. Remove Stud (41) from the Body.

9. Remove Filter Tube (40) from the Body.

Lever and Cover from Pump Tube

10. Remove Capscrews (5), Lock Washers (15), and

Nuts (16) that secure Pump Tube Assembly (4) to

Cover (14).

• Remove the Pump Tube Assembly from the Cover.

11. Remove Retaining Rings (6) from one end of Pin (7)

and Pin (13).

12. Remove Pin (13) and Pin (7) from the Pump Tube

Assembly.

Item

Part No.

No.

Body

321191

Tube, Filter

Stud

171001-14

O-Ring, 3/4 " ID x 15/16 " OD

Spring and Adapter Assembly

Legend:

Part numbers left blank are not available separately

Figure 4 Fluid Filter Assembly 321203 - Exploded View

Description

Qty

Alemite LLC