Clarke HSEC650A Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Pompa dell'acqua Clarke HSEC650A. Clarke HSEC650A 17. Submersible pumps
Anche per Clarke HSEC650A: Istruzioni per il funzionamento e la manutenzione (20 pagine)
Stampa la pagina
MAINTENANCE
WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT
IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,
ENSURE THE CIRCUIT BREAKER IS OPEN.
This pump should require no maintenance other than regular cleaning.
If the pump starts to show signs of wear or damage, contact your CLARKE
dealer for advice.
CLEANING
1. Check the pump installation regularly to ensure the water inlet is clear of
leaves or other debris.
2. Take extra care to remove any debris from around the impeller.
NOTE: Do not attempt to repair the pump yourself. Repairs must be carried
out by your CLARKE dealer, or contact the CLARKE Service
Department.
STORAGE
When the pump is not being used for extended periods, clean and dry it
thoroughly and store it indoors. If the pump is left in water, it must be run at
least once a week to prevent it from seizing up.
SPECIFICATIONS
Part Number
Outlet Diameter
Voltage
Motor Wattage@ max flowrate
Fuse Rating (amps)
Cable length (m)
IP Rating
Max. Head (m)
Dimensions (D x W x H) mm
Weight
Maximum Depth
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
HSEC650A
7230290
2"BSP (inc 2"BSP to 50 mm Hose Adaptor)
230V/50hz
665W
13
10
IP68
9.5m
240 x 180 x 420
17
5m
7
HSEC651A
7230295
110V/50Hz*
665W
10
IP68
9.5m
240 x 180 x 420
17
5m
HSEC1400A
7230243
230V~50Hz
1400 W
13
10
IP68
13 m
228 x 305 x 478
29.85.5 kg
6 m