Directed Electronics SmartStart 3000 Series Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Avviamento a distanza Directed Electronics SmartStart 3000 Series. Directed Electronics SmartStart 3000 Series 16. Remote start system with keyless entry
Anche per Directed Electronics SmartStart 3000 Series: Manuale d'uso (6 pagine)
Stampa la pagina
Disabling the Remote Start system
This feature allows your system's remote start unit to be temporarily
disabled to prevent the vehicle from being remote started accidentally.
This feature is useful if the vehicle is being serviced or stored in an
enclosed area. To disable the remote start, move the shutdown toggle
switch to the OFF position. The switch can be installed in a location
of your choice. Check with your installer for recommended locations.
Location Of Shutdown Switch_________________________
Programming options
Programming options control your system's normal, operational set-up.
Most options do not require additional parts, but some may require
installation labor. See your authorized Directed dealer for more details.
The following is a list of the programmable options, with the factory
settings in bold.
•
12, 24, or 60 minute run time. Your system can be programmed
to allow the vehicle to run for 12, 24, or 60 minutes when remote
started. Can be set up to minute increments by your installer.
Parking lights flashing or constant. Your system can be pro-
•
grammed to flash or turn on the parking lights constantly during the
entire remote start operation.
4
© 2010 Directed Electronics. All rights reserved.