CTEK BATTERY ANALYZER Manuale

Sfoglia online o scarica il pdf Manuale per Strumenti di misura CTEK BATTERY ANALYZER. CTEK BATTERY ANALYZER 4.
Anche per CTEK BATTERY ANALYZER: Manuale di avvio rapido (2 pagine)

Stampa la pagina

MANUAL

CONGRATULATIONS

On the purchase of your new professional CTEK Battery Analyzer. The Battery Analyzer

represents the latest technology in battery testing and will provide you quickly and safely

with easy to understand, accurate results.

IDENTIFYING YOUR BATTERY RATING

Your battery should have a label attached showing its performance rating. Use this infor-

mation to set the Battery Analyzer. If not visible contact your battery supplier for guidance.

Battery label

- typical location

CONNECTING THE ANALYZER TO THE BATTERY

Note: Tests should only be undertaken with the vehicle engine and any electrical loads in

the 'Oﬀ' position.

1. Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-)

terminal. The Battery Analyzer switches on when both connections are made.

2. Ensure a good connection by moving the clamps around on the terminals. The Battery

Analyzer requires that both sides of each clamp be properly connected before testing

can take place. A poor connection will result in the 'CHECK CONNECTION' warning.

If this happens, clean the battery terminals and clamps and reconnect.

3. Following the start up screens, enter the rating of the battery you are testing* (EN or

CCA according to Battery Analyzer model) using the '▲' and '▼' buttons. The default

setting is 500 EN (or 500 CCA according to model).

4. Press the TEST button and begin the battery test.

5. The result of the test is displayed on the screen.

6. If retest is required, disconnect the Battery Analyzer, reconnect it to the battery ter-

minals, and repeat the process.

EN • 3